Buyer's Guide

Vibration Monitoring Systems for Manufacturing

An evaluation guide for selecting vibration monitoring hardware and software for rotating equipment in manufacturing plants, covering sensor type, analytics capability, deployment model, and integration requirements.

The Key Distinction

The difference between a vibration monitoring system that prevents failures and one that just collects data comes down to analytics: does it compute bearing fault frequencies automatically, trend amplitude against a baseline, and trigger a maintenance action when it matters?

What a Complete Vibration Monitoring System Includes

A vibration monitoring system is not a single product. It is a chain of components that must work together: sensor, data collection and transmission layer, analytics platform, and alarm and reporting workflow. A failure at any link in that chain limits what you can act on.

The four components in a complete system:

Evaluation Criteria

Sensor Frequency Range

The frequency range you need depends on your machine speeds. Bearing fault frequencies scale with shaft RPM. A sensor with a useful range to 1 kHz covers most bearing faults on equipment running between 300 and 3,600 RPM. Equipment running at higher speeds or with small bearings may require sensors ranging to 5 kHz or higher.

Ask vendors for the sensor's usable frequency range at your operating temperature, not just the published specification. Thermal effects shift the frequency response of MEMS accelerometers.

Mounting Options

Stud mounting delivers the best high-frequency coupling but requires drilling into the machine housing. Magnet mounting is faster to install and acceptable for most low- and mid-frequency applications. Adhesive mounting is appropriate for smooth surfaces where magnets are impractical. Confirm with the vendor which mounting method the sensor was characterized for, because the published frequency response typically assumes stud mounting.

Wireless Battery Life

Battery life on wireless sensors varies significantly by measurement interval and transmission rate. A sensor measuring every 10 minutes will drain a battery faster than one measuring every hour. Published battery life figures typically assume a specific measurement rate that may not match your monitoring requirements.

Ask: What is battery life at your target measurement interval? Can measurement rate be adjusted per asset? Is battery replacement field-serviceable without calibration?

Bearing Fault Frequency Automation

This is the single most important analytics capability to evaluate. Bearing fault frequencies (BPFO, BPFI, BSF, FTF) are deterministic: they can be calculated from the bearing's geometry and the shaft speed. A platform that requires a vibration analyst to manually set fault frequency bands for each bearing on each machine does not scale. A platform that looks up bearing designations from a database and configures fault frequency tracking automatically scales to hundreds of machines without proportional analyst time.

Ask vendors: Does your platform maintain a bearing database? Does it automatically compute fault frequencies from bearing designation and measured speed? Does it show trending of fault frequency amplitude over time?

Baseline-Relative Alarming

Fixed-threshold alarming (alarm if RMS exceeds X g) triggers too many false positives on machines with inherently high vibration levels and misses early-stage faults on clean machines where even a modest increase is significant. Baseline-relative alarming compares current readings to a machine-specific baseline established during normal operation, which produces more meaningful alarm thresholds for each specific asset.

CMMS Integration

An alarm that creates an email does not close the loop. An alarm that creates a work order in your CMMS with the asset ID, fault description, and severity level does. Ask whether integration is native (direct API connection) or requires middleware. Ask which CMMS platforms are supported and whether integration requires IT involvement to configure.

Key Questions to Ask Any Vendor

  1. What is the measurement frequency range, and what mounting method was used to characterize it?
  2. Does your analytics platform maintain a bearing database and compute fault frequencies automatically?
  3. How does the system establish and update baselines for each machine?
  4. What is battery life at my target measurement interval?
  5. Which CMMS platforms do you integrate with natively, and what does the work order creation workflow look like?
  6. What happens when the system flags a fault? Walk me through the workflow from alarm to work order.
  7. What is the deployment timeline for 50 machines? 200 machines?

What Tractian Offers

Tractian's condition monitoring system combines wireless triaxial accelerometers with a cloud analytics platform designed around automatic fault detection for rotating equipment.

Sensor Hardware

Tractian's wireless sensors use triaxial accelerometers to capture vibration in all three measurement planes simultaneously. The sensors transmit via a long-range wireless protocol and are rated for industrial environments. Measurement intervals are configurable per asset, and the sensors are battery-powered with field-replaceable batteries.

Bearing Fault Frequency Detection

The Tractian platform maintains a bearing database and automatically computes BPFO, BPFI, BSF, and FTF for bearings in the database when the bearing designation is entered. The platform tracks fault frequency amplitude over time and trends each fault frequency independently, so early-stage outer race defects are distinguishable from inner race or rolling element defects by the time maintenance is scheduled.

Baseline-Relative Trending and Alarms

After an initial baseline period, the platform tracks deviation from each machine's established normal. Alarms are configured relative to that baseline rather than against fixed thresholds, which reduces false positives and makes alarm thresholds meaningful for each specific machine.

Alarm to Work Order Workflow

Tractian integrates with major CMMS platforms to create work orders directly from alarm events. When the system detects a fault condition, a maintenance team member receives a notification with the asset, fault type, and severity. The corresponding work order can be created in the CMMS from within the Tractian platform without requiring manual re-entry.

Other Platforms

[PLACEHOLDER: Research platforms before publishing. Do not invent names, features, pricing, or reviews. Source from vendor sites and verified third-party reviews (G2, Capterra, peer publications). Include at least three competing platforms with: sensor hardware specifications, analytics capabilities, deployment model, pricing model if public, and documented integration list. Follow BOFU competitor content rules: Tractian section only in full; all others as clearly labeled placeholders.]

See Tractian's Vibration Monitoring System

Wireless sensors, automatic bearing fault detection, and direct CMMS integration. No vibration analyst required for daily operation.

See Mechanical Monitoring
mechanicalmonitoring.com is an independent resource covering rotating equipment monitoring and condition-based maintenance. Product references are for informational purposes only. Verify all specifications with the vendor before purchasing. mechanicalmonitoring.com is operated by Tractian; see tractian.com for full product details.